Posts

CCI Best Settings for 4h: Default vs Top Settings Backtested (Fees Included)

Image
Say you put CCI (Commodity Channel Index) on your chart and traded every signal for the last 90 days. Here is how the default 20 · -100 · 100 did, side by side with every other setting combination under the same conditions. We ran all 1,400 setting combinations on 10 coins (BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE) across 15m, 30m, 1h and 4h, with a 0.11% fee taken out of every trade. The figures in this post are as of 2026-10-27, and every result is recomputed nightly with fresh data. How does CCI work? The Commodity Channel Index (CCI) was introduced by Donald Lambert to track cycles in commodity markets. It takes the typical price (hlc3, the average of high, low and close), measures how far it sits from its moving average over the same period, and divides that gap by the mean deviation scaled by Lambert's constant. TradingView's default length is 20. Despite the name, CCI is now used on stocks, forex, crypto and pretty much any market. The scaling is meant...

This Week's Most Improved TradingView Strategies: Top 5 (1h)

Image
We recomputed 184,480 setting combinations on BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE across 15m to 4h over the past 90 days, with the 0.11% fee per trade included, and compared them with 2026-10-19 (7 days earlier). Strategies that improved Nadaraya-Watson Envelope Strategy: 29% → 38% of settings positive (+9 points) Stochastic RSI (TradingView built-in): 43% → 51% of settings positive (+8 points) Stochastic (TradingView built-in): 49% → 56% of settings positive (+8 points) Commodity Channel Index (TradingView built-in): 52% → 59% of settings positive (+8 points) Williams %R (TradingView built-in): 39% → 46% of settings positive (+7 points) Squeeze Momentum Indicator [LazyBear]: 62% → 69% of settings positive (+6 points) VWAP (TradingView built-in, Anchor Session): 9% → 15% of settings positive (+6 points) Know Sure Thing (TradingView built-in): 61% → 66% of settings positive (+5 points) Parabolic SAR (TradingView built-in): 46% → 50% of settings positive (+5 points) ...

BB+RSI Best Settings for 1h: Default vs Top Settings Backtested (Fees Included)

Image
Is the default BB+RSI (Bollinger + RSI Double Strategy, ChartArt v1.1) good enough? TradingView loads BB+RSI with 200 · 2 · 6 out of the box, so we checked how those exact inputs held up in the latest market. We ran all 1,000 setting combinations on 10 coins (BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE) across 15m, 30m, 1h and 4h, with a 0.11% fee taken out of every trade. The figures in this post are as of 2026-10-25, and every result is recomputed nightly with fresh data. What is BB+RSI? BB+RSI is a ChartArt strategy on TradingView built around a “double” condition: it acts only when Bollinger Bands and the Relative Strength Index give a signal on the same bar. Bollinger Bands center on a simple moving average of the close with bands a set number of standard deviations away, while RSI turns the ratio of recent gains to losses into a 0 to 100 momentum reading. The buy side needs two things on one bar: the close crossing back up through the lower band, and RSI crossing a...

BB+RSI Best Settings for 15m: Default vs Top Settings Backtested (Fees Included)

Image
Say you put BB+RSI (Bollinger + RSI Double Strategy, ChartArt v1.2) on your chart and traded every signal for the last 90 days. Here is how the default 200 · 2 · 6 did, side by side with every other setting combination under the same conditions. We ran all 1,000 setting combinations on 10 coins (BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE) across 15m, 30m, 1h and 4h, with a 0.11% fee taken out of every trade. The figures in this post are as of 2026-10-24, and every result is recomputed nightly with fresh data. How does BB+RSI work? BB+RSI is a ChartArt strategy on TradingView built around a “double” condition: it acts only when Bollinger Bands and the Relative Strength Index give a signal on the same bar. Bollinger Bands center on a simple moving average of the close with bands a set number of standard deviations away, while RSI turns the ratio of recent gains to losses into a 0 to 100 momentum reading. The buy side needs two things on one bar: the close crossing back up...

BB Breakout Best Settings for 4h: Default vs Top Settings Backtested (Fees Included)

Image
BB Breakout (Bollinger Bands Breakout Strategy, TradeChartist) behaved very differently by timeframe. Over the past 90 days, 64% of setting combinations finished positive after fees on 4h, but only 24% did on 15m. We ran all 1,960 setting combinations on 10 coins (BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE) across 15m, 30m, 1h and 4h, with a 0.11% fee taken out of every trade. The figures in this post are as of 2026-10-23, and every result is recomputed nightly with fresh data. What does BB Breakout actually measure? BB Breakout is a Bollinger Bands breakout strategy published on TradingView by TradeChartist. Bollinger Bands put a simple moving average of the close in the middle and draw an upper and lower band a set number of standard deviations away. The bands widen when volatility rises and tighten when it fades, which makes them a common yardstick for whether price has moved outside its usual range. This strategy reads the bands as a trend trigger rather than a mean...

Supertrend+EMA Best Settings for 1h: Default vs Top Settings Backtested (Fees Included)

Image
Is the default Supertrend+EMA (Supertrend + EMA Trend Filter Strategy) good enough? TradingView loads Supertrend+EMA with 10 · 1.8 · 200 · False · False · 4 · 8 · False · 14 · 14 · 20 out of the box, so we checked how those exact inputs held up in the latest market. We ran all 1,000 setting combinations on 10 coins (BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE) across 15m, 30m, 1h and 4h, with a 0.11% fee taken out of every trade. The figures in this post are as of 2026-10-22, and every result is recomputed nightly with fresh data. What is Supertrend+EMA? Supertrend+EMA is based on the public TradingView script “BTCUSD Supertrend + EMA Trend Filter”. Supertrend is a trend-following tool that places bands ATR times a multiplier away from the bar midpoint and flips direction when the close breaks a band. This strategy uses that moment of change, the flip, as its entry trigger. A flip on its own will also fire against the larger trend, so an exponential moving average is lay...

Supertrend MTF Best Settings for 1h: Default vs Top Settings Backtested (Fees Included)

Image
Say you put Supertrend MTF (Daily Supertrend + Moving Average Cross Strategy, Supertrend MTF, Daveatt) on your chart and traded every signal for the last 90 days. Here is how the default 3 · 3 · 7 · 20 did, side by side with every other setting combination under the same conditions. We ran all 1,000 setting combinations on 10 coins (BTC, ETH, SOL, XRP, BNB, DOGE, ADA, LINK, SUI and HYPE) across 15m, 30m, 1h and 4h, with a 0.11% fee taken out of every trade. The figures in this post are as of 2026-10-21, and every result is recomputed nightly with fresh data. How does Supertrend MTF work? Supertrend MTF is a strategy Daveatt published on TradingView that pairs a higher-timeframe Supertrend with a simple moving average crossover. The Supertrend is calculated on daily bars, and each chart bar receives the value from the last completed day, so an unfinished day never leaks into the signal. Bands sit ATR times Factor away from the daily bar midpoint, and the direction flips when the clos...